Audio Technica AT4051B Small Diaphragm Modular Cardioid Microphone
Couldn't load pickup availability
Buy a Demo & Save
Buy an Open Box & Save
Interest Free Finance
12 Month Warranty*- Click & Collect (Sydney)
- Same Day Dispatch*
- Friendly & Expert Advice
- 100% Australian Stock
- 7 Day Exchanges*
12 Month Warranty*Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- High front-to-back rejection ratio—cardioid polar pattern improves isolation of the desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
| ELEMENT | Externally polarized (DC bias) capacitor |
| POLAR PATTERN | Cardioid |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| LOW-FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -34 dB (19.9 mV) re 1V at 1 Pa |
| IMPEDANCE | 50 ohms |
| MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) |
| NOISE | 16 dB SPL |
| DYNAMIC RANGE (typical) | 129 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 78 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 48V DC, 4.8 mA typical |
| SWITCH | Flat, roll-off; 10 dB pad (nominal) |
| WEIGHT | 126 g (4.4 oz) |
| DIMENSIONS | 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| OPTIONAL INTERCHANGEABLE ELEMENTS | AT4049b-EL (omnidirectional); AT4053b-EL (hypercardioid) |
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case |
| AUDIO-TECHNICA CASE STYLE | S1 |
What's Included
1x Audio Technica AT4051B Small Diaphragm Modular Cardioid Microphone
1x AT8405a Stand Clamp for 5/8"-27 Threaded Stands
1x Windscreen
1x Protective Carrying Case
All deliveries within Australia are facilitated by Australia Post, Startrack or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however, if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
Please allow between 2-7 business days for standard deliveries to metro* areas and capital cities. For suburbs outside metro areas please allow an additional 2-5 business days for delivery. *Metro capital cities include: Sydney, Canberra, Wollongong, Gold Coast, Brisbane, Melbourne, Adelaide, Perth, Hobart or Darwin.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labour required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. PLEASE NOTE: *This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Batteries, Consumable Products and Travel Carry Bags included with our kits. DEMO STOCK: All demo stock items are sold 'as-is' and come with a standard 12 month warranty. Stock will either be repaired, substituted with a similar demo item (subject to availability), you may opt for an exchange or a store credit may be offered. Please contact us for further detail.