Rode VideoMic Pro Microphone with Rycote Lyre Shockmount
Couldn't load pickup availability
Buy a Demo & Save
Buy an Open Box & Save
Interest Free Finance
12 Month Warranty*- Click & Collect (Sydney)
- Friendly & Expert Advice
- 100% Australian Stock
- 7 Day Exchanges*
12 Month Warranty*The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
AU-3762C3DD
At the heart of the Rode VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the Videomic Pro are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The Rode VideoMic Pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz (selected HPF @80) |
| Output Impedance | 200Ω |
| Maximum SPL | 134dBSPL |
| Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 14dBA |
| Weight | 85g |
| Dimensions | 100mmH x 75mmW x 170mmD |
| Warranty | 1 year with free extension to 10 years following registration here |
All deliveries within Australia are facilitated by Australia Post, Startrack or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however, if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
Please allow between 2-7 business days for standard deliveries to metro* areas and capital cities. For suburbs outside metro areas please allow an additional 2-5 business days for delivery. *Metro capital cities include: Sydney, Canberra, Wollongong, Gold Coast, Brisbane, Melbourne, Adelaide, Perth, Hobart or Darwin.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labour required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. PLEASE NOTE: *This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Batteries, Consumable Products and Travel Carry Bags included with our kits. DEMO STOCK: All demo stock items are sold 'as-is' and come with a standard 12 month warranty. Stock will either be repaired, substituted with a similar demo item (subject to availability), you may opt for an exchange or a store credit may be offered. Please contact us for further detail.