Godox WMicS1 Pro Kit 2 Two-Person Camera-Mount Wireless Omni Lavalier Microphone System (514 to 596 MHz)
Couldn't load pickup availability
Buy a Demo & Save
Buy an Open Box & Save
Interest Free Finance
12 Month Warranty*- Click & Collect (Sydney)
- Friendly & Expert Advice
- 100% Australian Stock
- 7 Day Exchanges*
12 Month Warranty*Designed for mobile journalists, videographers, and vloggers, the Godox WMicS1 Pro Kit 2 is a wireless system with two lavalier microphones and just one receiver. It delivers reliable transmission with a clear sound at a distance up to 328' and offers a complete solution for streaming or recording dialogue, interviews, lectures, and speech with two people talking simultaneously—directly to a mirrorless/DSLR camera, camcorder, or mixer. Easy-to-use with plug-&-play operation, this system is well suited for mobile journalists, YouTube/Instagram creators, TikTok personalities, vloggers, and more.
This Pro version offers full metal housing on the components, an improved OLED display that is easily seen in both daylight and darkness, and adjustable antennas that allow for better positioning to improve reception.
The WMicS1 Pro Kit 2 includes two bodypack transmitters with omnidirectional lavalier mics. It also comes with a receiver that mounts on your DSLR/mirrorless camera's shoe mount and plugs into the camera's audio input jack via the included 3.5mm TRS cable. The XLR output cable is for use with professional camcorders, while a 3.5mm TRRS cable is supplied for use with mobile devices.
The system offers 96 frequencies to choose from to avoid wireless signal interference. The transmitters and the receiver operate on two AA batteries but can also be powered via USB. If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal. A carrying case for the components is included.
Two Microphones into One All-Metal Receiver
- The two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously receive signals from the two mic/transmitters.
- In mono mode, the sound is recorded equally on both the left and right channels of your camera—great when you're only working with a single microphone. When using two microphones, switching to stereo mode means each sound is recorded separately with one on the left channel of your camera and the other on the right channel—allowing you to isolate each person's voice and adjust each level individually later in post.
- There are 30 levels of volume adjustment to control the audio output of the receiver—for both mics individually.
Two All-Metal Bodypack Transmitters with Lavalier Mics
- The rugged, compact bodypack transmitters are equipped with an On/Off switch that doubles as a mute button.
- The transmitters feature an easy-to-read OLED display that indicates the mic's input level, muting, and battery life.
- RF power can be switched between 40mW for maximum transmission distance or 10mW for maximum battery life.
- The lavalier microphones feature omnidirectional pickup patterns that help to deliver consistent audio levels even when the subject turns away form the mic.
Features
- 2-Person Lectures, Streaming, Interviews
- 2 x Transmitters with Omni Lavalier Mics
- Compact Dual-Channel Receiver
- Metal Housings, Easy-to-Read OLED Screen
- Flexible Antennas, Mono/Stereo Modes
- Adjustable RF Output Power
- Headphone Monitoring with Volume Control
- Powered by AA Batteries or USB Port
- Includes Cables and Carrying Case
- 328' Range
Specifications
|
Wireless Technology |
Analog UHF |
|
Number of RF Channel Frequencies |
96 |
|
Included Transmitters |
2 x Bodypack with Microphone |
|
Diversity |
Non-Diversity |
|
RF Frequency Band |
514 to 596 MHz |
|
RF Channel Scanning |
Manual |
|
Max Operating Range |
328.1' / 100 m (Line of Sight) |
|
Max Transmitters per Band |
2 |
|
Built-In Recorder |
No |
|
Control App Support |
No |
|
Latency |
12 ms |
|
Receiver Type |
Camera-Mount |
|
Mounting Options |
Shoe-Mount (with Included Hardware) |
|
Antenna |
2 x 1/4 Wave External, Fixed |
|
Number of Audio Channels |
2 |
|
Audio I/O |
1 x 1/8" / 3.5 mm TRS Female Unbalanced Output (Lockable) |
|
Frequency Response |
50 Hz to 18 kHz |
|
Network I/O |
None |
|
USB/Lightning Connectivity |
1 x USB Type-C (Bus Power) |
|
Power Requirements |
Battery, Bus Power (USB) |
|
Battery Type |
2 x AA (Not Included) |
|
Display & Indicators |
1 x OLED (Battery Status, Frequency, Output Level, Power, Transmitter Battery Status) |
|
Operating Temperature |
32 to 122°F / 0 to 50°C |
|
Dimensions |
2.5 x 7.8 x 0.9" / 63 x 198 x 24 mm |
|
Weight |
8 oz / 226 g |
|
Transmitter Type |
Bodypack |
|
RF Output Power |
10 / 40 mW |
|
Audio I/O |
1 x 1/8" / 3.5 mm TRS Female Input (Lockable) |
|
Muting |
Off/On Switch |
|
Auto-Level Control |
No |
|
Sync Method |
Manual |
|
Antenna |
1 x 1/4 Wave External, Fixed |
|
Power Requirements |
Battery, Bus Power (USB) |
|
Battery Type |
2 x AA (Not Included) |
|
USB/Lightning Connectivity |
1 x USB Type-C (Bus Power) |
|
Display & Indicators |
1 x OLED (Audio Level, Channel, Mute) |
|
Operating Temperature |
32 to 122°F / 0 to 50°C |
|
Dimensions |
2.5 x 7.8 x 0.8" / 63 x 198 x 21 mm |
|
Weight |
7.5 oz / 212 g |
|
Microphone Type |
Lavalier |
|
Sound Field |
Mono |
|
Polar Pattern |
Omnidirectional |
|
SNR |
70 dB |
|
THD |
< 5% |
|
Output Connectors |
1 x 1/8" / 3.5 mm TRS Male |
|
Package Weight |
2.54 lb |
|
Box Dimensions (LxWxH) |
10.3 x 7.7 x 3.1" |
What's Included
1 x Godox WMicS1 Pro Kit 1 Camera-Mount Wireless Omni Lavalier Microphone System (514 to 596 MHz)
1 x RX Camera-Mount Receiver
2 x RX Bodypack Transmitter
2 x Omni Lavalier Microphone
3 x Belt Clip
1 x 3.5mm TRS to 3.5mm TRS Output Cable
1 x 3.5mm TRS to 3.5mm TRRS Output Cable
1 x 3.5mm TRS to XLR Output Cable
2 x USB Charging Cable
1 x Shoemount Adapter
1 x Carry Case
All deliveries within Australia are facilitated by Australia Post, Startrack or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however, if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
Please allow between 2-7 business days for standard deliveries to metro* areas and capital cities. For suburbs outside metro areas please allow an additional 2-5 business days for delivery. *Metro capital cities include: Sydney, Canberra, Wollongong, Gold Coast, Brisbane, Melbourne, Adelaide, Perth, Hobart or Darwin.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labour required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. PLEASE NOTE: *This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Batteries, Consumable Products and Travel Carry Bags included with our kits. DEMO STOCK: All demo stock items are sold 'as-is' and come with a standard 12 month warranty. Stock will either be repaired, substituted with a similar demo item (subject to availability), you may opt for an exchange or a store credit may be offered. Please contact us for further detail.